Pressure sensor / transmitter use and maintenance

Pressure sensors and transmitters are a common sensors , widely used in a variety of controlled environment, then we use the process of how to let him live longer too , today we talk in everyday life should be how to do .
1 , to prevent the waste deposited in the conduit and Crank Shaft Position Sensor with corrosive or hot media contacts .
2, the measurement of gas pressure , the pressure port should be open in the flow line to the top , and the sensor should be installed in the upper part of the process piping so that the accumulation of fluid injected into the process pipeline easily .
3, measuring fluid pressure , the pressure port should be opened in the side of the pipeline process , in order to avoid deposition of slag accumulation .
4 , guide pressure pipe should be installed in place of small fluctuations in temperature .
5 , measuring liquid pressure , Engine Temperature Sensors should be installed to avoid the impact of the liquid ( water hammer phenomenon ) , in order to avoid overvoltage damage the sensor .
6 , winter freezing occurs when the sensor is installed outdoors freezing measures must be taken to avoid the impulse in the mouth due to icing fluid volume expansion , resulting in loss of the sensor .
7, the wiring, the cable through the waterproof connector or entangling pipe and tighten the nut tight seal to prevent leakage of rainwater through the cable into the transmitter housing.
8, the measurement of steam or other high temperature medium , the need to take additional buffer tube ( coils ) and other condenser operating temperature of the sensor should not exceed the limit